Virtual Console FCD-CFxx Informations techniques Page 814

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 920
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 813
4.3.12.18 STOR0200 : "Array Manager is installed on the system."
4.3.12.19 STOR0201 : "Unable to determine whether the system has the minimum required
versions of the RAID controller drivers and firmware."
4.3.12.20 STOR0202 : "The configuration file (Path: <file path>) that contains firmware and
driver information for <controller name> is not updated or is incorrectly formatted to
complete the comparison."
When event is generated, message will have the following substitutions:
<file path> = "C:\Program Files (x86)\Dell\SysMgt\sm\cfg"
<controller name> = "Controller 1 (PERC H800 Adapter)"
4.3.12.21 STOR0203 : "The current operating system kernel version and the non-RAID SCSI
driver version are older than the minimum required versions."
4.3.12.22 STOR0204 : "The non-RAID SCSI driver version is older than the minimum required
version."
4.3.12.23 STOR0205 : "Global rescan initiated for all storage components in the system."
4.3.12.24 STOR0206 : "Smart thermal shutdown feature is enabled."
4.3.12.25 STOR0207 : "Smart thermal shutdown feature is disabled."
4.3.12.26 STOR0208 : "Protection policy has changed."
4.3.12.27 STOR0209 : "Unable to monitor or manage SAS components because the
initialization sequence of the devices did not complete."
4.3.12.28 STOR0210 : "SCSI sense data (<sense info>) received from <device name>."
When event is generated, message will have the following substitutions:
<sense info> = "Sense key: 6 Sense code: 29 Sense qualifier: 0"
<device name> = "Controller 1 (PERC H800 Adapter)"
4.3.12.29 STOR0211 : "The <device name> has returned to normal state."
When event is generated, message will have the following substitutions:
<device name> = "Enclosure 0:0 on Controller 1 at Connector 0"
4.3.12.30 STOR0212 : "The <device name> has failed."
When event is generated, message will have the following substitutions:
<device name> = "Physical Disk 1:0:5 on Controller 0 at Connector 1"
814
Vue de la page 813
1 2 ... 809 810 811 812 813 814 815 816 817 818 819 ... 919 920

Commentaires sur ces manuels

Pas de commentaire