Virtual Console FCD-CFxx Informations techniques télécharger pdf (Page 526)

100

101

3.3.5.8 ENC8 : "The <Enclosure Name> alarm was disabled."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

3.3.5.9 ENC9 : "The <Enclosure Name> asset tag was changed."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

3.3.5.10 ENC10 : "The <Enclosure Name> asset name was changed."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

3.3.5.11 ENC11 : "The <enclosure name> service tag was changed."

When event is generated, message will have the following substitutions:

• <enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

3.3.5.12 ENC12 : "Communication resumed on <Enclosure Name>."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

3.3.5.13 ENC13 : "Unsupported configuration detected on <Enclosure Name>. <EMM0 1>

<EMM1 2>"

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "not implemented"

• <EMM0 1> = "not implemented"

• <EMM1 2> = " not implemented"

3.3.5.14 ENC14 : "The number of enclosures connected on <controller name> has exceeded

the maximum limit supported by the controller."

When event is generated, message will have the following substitutions:

• <controller name> = "port 0 of Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

3.3.5.15 ENC15 : "An enclosure blink operation has initiated on <Enclosure Name>."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

3.3.5.16 ENC16 : "An enclosure blink has ceased on <Enclosure Name>."

When event is generated, message will have the following substitutions:

526

1 2 ... 521 522 523 524 525 526 527 528 529 530 531 ... 919 920

Virtual Console FCD-CFxx Informations techniques Page 526

Commentaires sur ces manuels