Virtual Console FCD-CFxx Informations techniques télécharger pdf (Page 804)

100

101

4.3.8.25 PDR52 : "A redundant path is broken."

4.3.8.26 PDR53 : "A redundant path has been restored for <PD Name>."

When event is generated, message will have the following substitutions:

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.8.27 PDR54 : "A disk media error on <physical disk> was corrected during recovery."

When event is generated, message will have the following substitutions:

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.8.28 PDR55 : "Insufficient space available on the <physical disk> to perform a rebuild."

When event is generated, message will have the following substitutions:

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.8.29 PDR56 : "Bad block table on <physical disk> is 80% full."

When event is generated, message will have the following substitutions:

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.8.30 PDR57 : "Bad block table on <physical disk> is full. Unable to log block <logical

block address >."

When event is generated, message will have the following substitutions:

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

• <logical block address > = "a1b1c1d1e1f1"

4.3.8.31 PDR59 : "A bad disk block was reassigned on <physical disk>."

When event is generated, message will have the following substitutions:

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.8.32 PDR60 : "Error occurred on <physical disk> : <error code>."

When event is generated, message will have the following substitutions:

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

• <error code> = " Error 123"

4.3.8.33 PDR61 : "The rebuild of <physical disk> failed due to errors on the source physical

disk."

When event is generated, message will have the following substitutions:

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.8.34 PDR62 : "The rebuild failed due to errors on the target <physical disk>."

When event is generated, message will have the following substitutions:

804

1 2 ... 799 800 801 802 803 804 805 806 807 808 809 ... 919 920

Virtual Console FCD-CFxx Informations techniques Page 804

Commentaires sur ces manuels